| Home » Accessories » Blast Nozzles & Holders | |
|
 Please note: The below is only a very small sample of nozzles we are able to supply. If you require a specialized nozzle (for example) we will gladly be able to help, as the sole Distributors of Boride Nozzles within New Zealand we will be able to source the best nozzle for the job.
Please contact us for a full brochure and further information
Silicon Nitride Nozzles
Outlasts Tungsten and Silicon Carbide Nozzles, it has a polyurethane jacket that absorbs shock.
|
Model Number
|
Bore Diameter
|
Length
|
|
SN156-450P
|
1/4" (6.4mm)
|
5.5" (140mm)
|
|
SN159-550P
|
5/16" (7.9mm)
|
6" (152mm)
|
|
SN159-650P
|
3/8" (9.5mm)
|
7" (178mm)
|
|
SN159-750P
|
7/16" (11.1mm)
|
8" (203mm)
|
|
SN159-850P
|
1/2" (12.7mm)
|
9" (230mm)
|
Angle Nozzles
To reach hard-to-get places
|
|
|
|
|
Single 45 Degrees
|
|
T245-5
|
1/8" (3.2mm)
|
2 1/8"
|
|
T245-3
|
3/16" (4.8mm)
|
|
|
Triple 45 Degress
|
|
T245-23
|
1/8" (3.2mm)
|
|
|
Single 90 Degrees
|
|
T290-2
|
1/8" (3.2mm)
|
|
|
Triple 90 Degrees
|
|
T290-33
|
3/16" (4.8mm)
|
|
The below diagrams and Photos are of different Angled Nozzles available ex our warehouse, in Avondale Auckland. Please Contact us for further information and a full Boride Nozzle Brochure. ( online Catalogue Click here to View)
|
Triple 45 Degree Nozzle
|
|
Single 90 Degree Nozzle
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Single 45 Degree Nozzle
|
|
Reverse 45 Degree Nozzle
|
|
|
|
|
|
|
|
|
Water Induction Nozzles
Simple low cost solution for dust free blasting. No extra equipment required. Can be added to any existing blast machine. Includes short hose and control valve Note:Inhibitor injection system available (50mm thread)
|
Model Number
|
Bore Diameter
|
Length
|
|
WIN 4
|
|
5 3/4"
|
|
WIN 5
|
|
6 1/4"
|
|
WIN 6
|
|
6 3/4"
|
|
WIN 7
|
|
8 3/4"
|
|
WIN 8
|
|
|
Straight Bore Nozzles
Aluminium jacket, Tungsten Carbide lined.
|
Model Number
|
Bore Diameter
|
Length
|
|
AT-2
|
1/8"
|
1 3/4"
|
|
AT-3
|
3/16"
|
1 3/4"
|
|
AT-4
|
1/4" (6.4mm)
|
1 3/4"
|
|
AT-5
|
5/16" (7.9mm)
|
1 3/4"
|
|
AT-6
|
3/8" (9.5mm)
|
1 3/4"
|
Square Shooters
Time Tested Solid Tungsten Carbide Single-Piece Liner, Non-Galling Brass Threads, Sight Ridges Insure Proper Nozzle Orientation, Sturdy Urethane Protective Jacketing, Weighted and Balanced to Greatly Reduce Recoil Force, make this nozzle a proven time and material cost cutter.
|
|
|
|
|
SS-450
|
1/4" (6.4mm)
|
5.5" (140mm)
|
|
SS-550
|
5/16" (7.9mm)
|
6" (152mm)
|
|
SS-650
|
3/8" (9.5mm)
|
7" (178mm)
|
|
SS-750
|
7/16" (11.1mm)
|
8" (203mm)
|
|
SS-850
|
1/2" (12.7mm)
|
9" (230mm)
|
|
|
|
|
As shown above, the Square ShooterTMis 72% faster than the conventionalLong Venturi nozzle. Air pressure forboth was set at 100 PSI.
|
Conventional Long Venturi requires a 50% overlap. The Square ShooterTM requires onlya 15% to 20% overlap, yielding abrasive savings of 30%.
|
Nozzle Holders
Aluminium Nozzle Holders for 3/4" Threaded Nozzles These holders are suitable for the AT and the Angled Aluminium Nozzle Holders for 3/4" Threaded Nozzles
|
Model Number
|
Hose Size
|
|
BMS-BBBHO-27
|
28mm OD
|
|
BMS-BBBHO-32
|
34mm OD
|
|
|
